Vt10 Vt20 Heat Exchanger Plate for Sugarcane Juice Cooling Chevron Parrtern

Basic Info

Model NO.	VT10
Brand	Apv/Sondex/Gea/Tranter/Funke/API
Plate Pattern	Herrignbone / Chevron / Corrugated
Plate Thickness	0.5 mm / 0.6 mm
Gasket Material	NBR EPDM FKM EPDM-Ht
Frame	Carbon Steel / Stainless Steel
Channel Gap	3 mm - 6 mm
Gasket Type	Clip on / Glueless / Glue
Connection	DN25-DN300
Channel Plate	4 Holes
End Plate	0 Holes
Channel Gasket	Intermediate Gasket
Plate Type	Intermediate Plate
Transport Package	Shipping
Specification	110*36 cm
Trademark	Propellet
Origin	China Shandong
HS Code	8409911000
Production Capacity	1000

Product Description

Product Overview

Beer mash cooling stainless steel heat exchanger plate

We offer a large variety of different plate patterns which are varying pressing depths and angles, to free flow patterns that allow media containing particles and fibres to pass through the heat exchanger unimpeded. High heat transfer coefficient based on Propellent's special design plate to meet with different heat transfer requirements.

Brands	Plate heat exchanger models
AlfaLaval	M3, M6M, M10M, M10B, M15M, M15B, M20M(T20M) , T20B, T20P, M30, AK20, CLIP3, CLIP6, CLIP8, CLIP10, MX25B, MX25M, TS6M, TS20M, P16, 22/P26, TL6B, TL10B, TL10P, TL15B, A15B, M6MW, M10BW, MK15BW, T20MW, AM10, AM20, A20B, AX30B, AC400, AC600
APV	T4, SR1, SR2, SR3, H12, H17, N25, N35, Q030D, Q030E, Q055D, Q055E, Q080E, SR6GL, K34, K55, A055, A085, J060, J092, J107, M60, M92, M107, B063, B110, B134, R5, SR9, Q series, J series, A series, H17, 35 series
GEA	VT04, VT10, VT20, VT20P, VT40, VT40M, VT80, VT80M, N40, VT405P, NT50T, NT50M,NT50X, NT100T, NT100M, NT100X, NT150S, NT150L, NT250S, NT250M, NT250L, NT350S, FA184
Tranter	GC8 GX26 GC51 GX64 GX145 GL13 GX42 GX51 GX85 GL16 GCD 044 GC60 GX91 GC26 GCD 054 GX 60 GX100
Sondex	S4A, S7A, S8A, S9A, S14A, S17, S18, S19A, S20A, S21, S21A, S22, S31A, S37, S38, S41A, S41, S42, S43, S47, S47A, S58, S62, S63, S64, S65, S81, S86, S100, S121, SW40, SF123
Vicarb	V8, V13, V20, V28, V45, V60, V85, V110
SWEP	C8, GX12, GL13, GC16, GX26, GC26, GX42, GC51, GX51, GC60, GX60, GX64, GX85, GX91, GX100, GX145, GX180, GX series
FUNKE	FP04, FP08, FP09, FP10, FP14, FP16, FP19, FP20, FP22, FP205, FP31, FP40, FP41, FP50, FP60, FP80, FP81, FP100, FP120, FP405
Thermowave	TL90SS, TL90PP, TL150SS, TL150PP, TL250SS, TL250PP, TL400SS, TL400PP, TL500SS, TL500PP, TL650SS, TL650PP
API	SIGMA25, SIGMA26, SIGMA35, SIGMA35X, SIGMA37, SIGMA56, SIGMA66, SIGMA96, SIGMA106, SIGMA156

Product Description

Plate Pattern The media flow through the channels of the pattern that is pressed into the heat transmission area of each plate. As such, the patterns have great impact on the heat transfer efficiency of the heat exchanger and must be carefully chosen to accommodate the specific requirements of each thermal duty. The sized of the needed heat transmission area can be reduced if a higher amount of the pressure drop is used. This makes it important to use the allowed pressure drop to the fullest. Some patterns only use a low pressure drop, but offer a lower level of turbulence, while others offer high turbulence in exchange for a high pressure drop. Other patterns have very deep channels, making them suitable for high-viscosity media and media that cause fouling.

Plate Material	Available Medium
AISI304, AISI316L	Pure Water, Fresh Water, Mineral Water
Titanium	Sea Water, Mineral Oil, Vegetable Water
254SMO	Dulute Sulphuric Acid etc.
Ni	Caustic Soda with high temperature and concentraction
Hastelloy	Concentration Sulphuric Acid etc.

Gasket Material	Temperature Range(ºC)	Hardness	Available Medium
NBR	-20 to 110	-75+/-3	Water, Oil, Acid etc.
EPDM	-30 to 150	80+/-5	Steam, Ammonia, Acid, Glycoletc.
NBR-HT	-30 to 160	85+/-5	Mineral Oil, Thermal Oil
EPDM-HT	-30 to 180	85+/-5	High Tempearture Water
FPM	-55 to 220	80+/-5	High Temperature Oil

Working Principle
Passing energy from one media to anotherin order to either heat up or cool down themedia, is the basis of heat transfer. Plateheat exchangers use highly efficient flowplates to achieve the heat transfer and aresuperior to tubular heat exchangers andother plate heat exchanger designs interms of heat transfer efficiency, spacerequirements and ease of maintenance.

Propellent Plate Heat Exchanger
Plate Type	Single plate
Flow Channel Between Plates	3.5mm ~12.0mm (Optional depends on working condition)
Plate Thickness	0.4mm ~ 1.0mm
Heat Transfer Plate Material	Stainless steel - 304/304L, 316/316L, 254 SMO, Titanium, Hastelloy C-276, others
Gasket Material	NBR, EPDM, HNBR, HEPDM, NBR-HT, FKM, Viton A, Viton G
Pressure Plate Material	Carbon steel, stainless steel and others on request
Temperature Range	-50ºC ~ +180ºC Varies with the media and gasket selection.
Maximum Pressure	Maximum standard pressure 10 bar / 16 bar
Port Connection	DN32, DN50, DN80, DN125, DN150, DN200, DN250, DN350

Applications
Alumina Beer Beverage Chemical Dairy Data center Marine Milk Oil and Gas
Paper-pulp Petrochemical Pharmaceutical Power-plant Refrigeration Waste waterCompany ProfileHeat Exchanger ProducationPackaging & ShippingPropellent serviceDesign/Calculate/Data/Drawings12 months free warranty and life-long maintenanceTraining and Operation ManuelTop quality, Competitive price, Fast fedbackPackage details: standard export plywood case & carton & customizing according to your requirements.Any requirement and questions, Feel free to contact us!